Page 6 of 15 Ver 1.0 File No.:S27x10
GSM 3G M2M RTU
Automation solution
Transmit power
Class 4 (2W) at EGSM 900 and EGSM 850
Class 1 (1W) at GSM 1800 and GSM 1900
GPRS connectivity
GPRS multi-slot class 10
GPRS Data Transmission
GPRS data downlink transfer: max. 85.6 kbps
GPRS data uplink transfer: max. 42.8 kbps
Coding scheme: CS-1, CS-2, CS-3 and CS-4
TCP/IP stack
TCP,UDP
SIM interface
Supporting 3V /5V SIM Card
External antenna
SMA Antenna interface, 50 Ohm
Serial Interfaces
1 USB Port;
Protocols
SMS, GPRS UDP,TCP, Modbus RTU, Modbus TCP and more equipment
protocols can be added according to requirements.
RS232/485
1 RS232 and 1 RS485, Support Transparent transmission and Modbus RTU
Master, Modbus RTU Slave.
RJ45 Port
1 Port, for LAN IP communication
Wireless Module
433Mhz, DSSS, 3-5Km or 6-10Km.(Only Special Model support it)
Digital Inputs
8 Digital input, NC/NO/Edge/Level type, Can be used as Pulse Counters;
Analog Inputs
6 Analog Inputs. 12 bit resolution, 0-5V or 0-20mA or 4-20mA;
Temp.&Hum Inputs
TH100, Range: Temperature: -40°C to +80°C, Humidity: 0~100%RH;
Relay Outputs
4, Rated: 5A/30VDC,5A/250VAC
Power Outputs
2 Port, for external device.
Memory Capacity
Internal Memory inside, can save the data for 1000events.
Backup Battery
3.7V 1200mAH
Temperature range
-10-+70 °C
Humidity range
Relative humidity 95% (condensation free)
Exterior dimension
168mm*113mm*32.3mm
Net Weight
1000 g
2.Safety Directions
Safe Startup
Do not use unit when using GSM/3G equipment is prohibited or might bring disturbance or danger.
Interference
All wireless equipment might interfere network signals of unit and influence its performance.
Avoid Use at Gas Station
Do not use unit at a gas station. Power off Gate Opener when it near fuels or chemicals.
Power it off near Blasting Places
Please follow relevant restrictive regulations. Avoid using the device in blasting places.
Reasonable Use
Please install the product at suitable places as described in the product documentation. Avoid
signal shielded by covering the mainframe.
Use Qualified Maintenance Service
Maintenance can be carried out only by qualified maintainer.
