KING-METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax
：
+0086 022 8478 0358 Tel: +0086 022 8478 0378
19
The Sensitivity of PAS Setting
SCN means the sensitivity of PAS, and 2 to 9 can be selected.2 is strongest, 9 is the weakest.
UP/DOWN
is
to select sensitivity value, and
MODE
is
to confirm selection and turn to magnet
disk setting. SCN default value is 2.
Proportion parameters Setting of PAS
N - denotes the proportional parameter of the PAS sensor.The parameter value can be
selected through
UP
/
DOWN
.The larger the value, the more obvious the feeling of
assistance.Press and hold
MODE
to confirm and return to the display personalized parameter
setting interface.
8.5.6 Speed sensor settings
SPS means Speed Sensor. Press
UP/DOWN
to select the quantity of magnet head (the range
is from 1 to 9), and press
MODE
to confirm and turn to Throttle Definition page. SPS default
value is 1.
