7.2.2 Backlight brightness
BL stands for backlight. The parameter1
backlight brightness parameter by
【
UP
7.2.3 Exit setting
In the setting state, short press
【
MODE
exit the setting state.
7.3 Password of Display Setting
Press and hold the
【
UP
】
and the
【
setting state. Then simultaneously press
setting state.
"P 2" is indicated on the screen, which represents
【
UP
】
and
【
DOWN
】
to increase/decrease input value. After entering the 4
to confirm. If the password is correct, enter
state. Long press
【
MODE
】
to exit.
7.3.1 Password usage
Select Y/N through
【
UP
】
/
【
DOWN
】
, Y means that it needs the power
the power-on password. Short press
display.
KING-METER TECHNOLOGY
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax
：
+0086 022 8478 0358
9
BL stands for backlight. The parameter1
、
2
、
3 mean the backlight brightness. The default value is 1. Chang
UP
】
/
【
DOWN
】
.1 is the darkest, 3 is the brightest.
MODE
】
to confirm and enter the next setting. Long press
d of Display Setting
【
DOWN
】
at the same time for 2 seconds and then lift it to enter the
setting state. Then simultaneously press
【
MODE
】
and
【
UP
】
for 2 seconds to enter the power
the screen, which represents to need input the password. Short press
to increase/decrease input value. After entering the 4-digit password,
If the password is correct, enter the password setting interface, otherwise it stays in the password input
to exit. The default password of the display is 1234.
, Y means that it needs the power-on password, N me
on password. Short press
【
MODE
】
to confirm and enter the password modification interface of the
METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
+0086 022 8478 0358 Tel: +0086 022 8478
The default value is 1. Change the
1 is the darkest, 3 is the brightest.
to confirm and enter the next setting. Long press
【
MODE
】
to save and
at the same time for 2 seconds and then lift it to enter the general
for 2 seconds to enter the power-on password
ress
【
MODE
】
to shift, and use
digit password, short press
【
MODE
】
the password setting interface, otherwise it stays in the password input
on password, N means that it doesnot need
to confirm and enter the password modification interface of the
