6.
Error code
When the e-bike electronic control system fails, the dis
definition of detailed error codes, see appendix 1.
The fault can only be exited when the fault is eliminated, and the e
fault occurs.
7.
User setting
7.1 Preparation before starting
Ensure that the connectors are firmly connected and turn on the power of the e
7.2 General setting
Long press
【
MODE
】
to turn on. When the display is turned on, press
2s, interface will enter the general setting.
7.2.1 Reset trip distance.
TC stands for resetting the trip distance, setting the parameters can be N/Y. The default N means not to reset the
trip distance. Press
【
UP
】
/
【
DOWN
】
the trip distance is not need to reset.
Trip distance and single riding time will be reset at the same time.
KING-METER TECHNOLOGY
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax
：
+0086 022 8478 0358
8
Low Voltage Flash
bike electronic control system fails, the display will automatically indicate the
definition of detailed error codes, see appendix 1.
The fault can only be exited when the fault is eliminated, and the e-bike cannot continue to drive after a
ation before starting
Ensure that the connectors are firmly connected and turn on the power of the e-bike.
to turn on. When the display is turned on, press
【
UP
】
and
【
DOWN
general setting.
stands for resetting the trip distance, setting the parameters can be N/Y. The default N means not to reset the
】
to select Y/N, Y means that the trip distance is need to reset.
the trip distance is not need to reset.
Trip distance and single riding time will be reset at the same time.
METER TECHNOLOGY CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
+0086 022 8478 0358 Tel: +0086 022 8478
play will automatically indicate the error code. For the
bike cannot continue to drive after a
DOWN
】
at the same time for
stands for resetting the trip distance, setting the parameters can be N/Y. The default N means not to reset the
to select Y/N, Y means that the trip distance is need to reset. N means that
