Technical parameter and complete vehicle description
- 11 -
Body Structure
1. Structural style
Semi-integral body structure
2. Structure
The bodywork structure adopts closed girder construction of five major assembly parts, which are
combined welded by rectangle steel pipes with advantages of strong structural stiffness, torsion
resistance and bending resistance as well as relatively simple craftwork. Main components of skeleton
have been performed anticorrosion treatment to ensure steady adhesion of coating and strong capacity
of antirust and corrosion-proof.
3. Interior trim
The interior adopts flexible design and the floor adopts steel plate/wood block composite construction,
and covered with anti-slip and antifriction leather with favorable sound insulation value.
4. Windows
The front windshield is the hyperboloid triplex glass fixed by the gluing; the rear windshields are the
hardened glass fixed by the gluing; the
side windows are close cycle window which are made of
hardened glass. The driver’s window is fixed with sliding window.
5. Baggage compartment
Without installing the baggage cabin.
6. Seat
Driver’s seat: Q15-2 adjustable seat with high backrest and three-point belt
(
E-MARK
)
.
Passenger seats: FAINSA type, high backrest, the all seats are equipped with three-point safety belt.
7. Interior accessory device
The vehicle is equipped with electronic clock, sunshade, safety hammer, emergency escaping window,
curtain
,
reversal monitor, destination board, guide mike .etc.
8. Air-conditioning system
Defroster: WEBASTO cooling /heating defrosting device
Heating: WEBASTO system
9. Door
The door adopts the full aluminum remote control out-swing pneumatic doors.
The out-swing door adopts the advanced electrically aerodynamic theory design, with the motion of
opening and closing placidly
、
agilely
、
safely , further, keeping credible locking and anti-clamp
function.
A. Basic function
a. There are two electrically switches, the interior one is trigger touch-tone, which located on the
dashboard of the front right side of the driver, the outside one is a remote control switch. , both switches
can control the door.
b. When the circuit is in OFF position , the emergency switch can be used in the interior and exterior,
the emergency switch of the door is located inwardly upon the entrance of the door and outwardly
behind of the door on the left/right side panel respectively, Please rotate the switch and throw open the
door in emergency.
c. Commonly the door is closed, when touch off any electrically switch, the door would move placidly
at a certain velocity, along with it, the step-lamp lights .when touch off the switch again , the door
would return placidly at a certain velocity, after the door returned , the step-lamp goes out.
Summary of Contents for XMQ6127J series
