King Long XMQ6127J series, Operating Manual

Page: 132 / 140

Appendix
A-1
Driver tools table
（
one each
）
No. Part name No. Part name
1 Tool box 21 Flat-tip screwdriver 6*100MM
2 Combination wrench 8 22 Hammer 1 pound
3 Combination wrench 10 23 Slip joint pliers 8”
4 Combination wrench 12 24 Nipper pliers 6”
5 Combination wrench 13 25 Tire pressure gauge 0-1.4MPa
6 Combination wrench 14 26 Valve core wrench
7 Combination wrench 15 27 Filter wrench
8 Combination wrench 16 28 Pry bar also used as rocker lever 55cm
9 Combination wrench 17 29 Pry bar also used as handle 50cm
10 Combination wrench 18 30 Grease gun 400cm
3
11 Combination wrench 19 31 Socket wrench for wheel nut 32(hexagon)
12 Combination wrench 21 32 Torque bar 315 X 25 X 25
13 Combination wrench 22 33 Wrench for front wheel hub bearing nut 70 mm (hexagon)
14 Combination wrench 24 34 Wrench for rear wheel hub bearing nut 110 mm (hexagon)
15 Combination wrench 27 35 Final drive locknut 55mm
16 Combination wrench 30 36 Spare wheel lifter 22X550
17 S-double box wrench 13x15 37 Wrench for drive axle drain plug 10x10
18 Adjustable wrench 8” 38 Jack 16t J1601
19 Adjustable wrench 12” 39 Special tool box
20 Cross-head screwdriver 6”
The tools above are the state when choose Dongfeng Dena axle, when other axles are applied, driver tools may vary as
below
name cancel number add Axle manufacturer
Wrench for front wheel
hub bearing nut
70mm (hexagon)
1 60 X72 mm foursquare ZF Front axle
1
2.25’’or 57 mm
hexagon
MeiChi Front axle
1 58 mm North Benz Front axle
Wrench for rear wheel
hub bearing nut
110 mm
(hexagon)
1 115 mm hexagon DONG FENG DENA13T
1 4.03’’or102 mm MeiChi Rear axle
Final drive locknut 55 mm(hexagon) 1 51 mm hexagon
Fangsheng rear axle or Dongfeng
Dena or Hangzhou sanhua 9.5T
Socket wrench for wheel
nut
32 mm(hexagon) 1 41 mm hexagon
Dongfeng Dena or Hangzhou sanhua
9.5T
1 21 mm foursquare
Dongfeng Dena or Hangzhou sanhua
9.5T
Note: The tool box may vary according to different axle condition, for details, please refer to the encasement bill.