ASSEMBLY
12. Locate the drum (A) Fig.10 and install the 4 casters (B) under the drum by
simply screwing them into the base. Use a wrench to tighten each caster.
13. Place the large drum bag (C) Fig.10 inside the drum and fold the edges as
shown.
14. Install the drum handle (D) Fig.10 on the drum using 2 pan head screws,
washers and acorn nuts.
15. Install drum pressure hose (A) Fig.11 to the fitting on the drum. Slide hose
over fitting and secure hose with hose clamp (B). Connect the other end
of the drum pressure hose to the fitting on the intake housing (C). Slide
hose over fitting and secure hose with hose clamp (D). Slide drum under
the drum lid.
FIGURE 10
FIGURE 11
