UNPACKING & ASSEMBLY
UNPACKING
The Air Cleaner is shipped complete in
one carton. Carefully unpack the Air
Cleaner and all loose items from the
carton.
WARNING: DO NOT LIFT THE
AIR CLEANER BY ITS POWER CORD.
Contents:
A- Air cleaner unit (1)
B- Remote control (1) & 2 AA batteries
C- Inner 2 pocket filter (1)
D- Outer filter (1)
E- Ceiling mounting hooks (4)
F- Air cleaner hooks and nuts (4 ea.)
G- Chains (4)
Assembly
Reminder:
• This unit will work best if it is located away from
corners and heating/cooling vents.
• This unit is specifically designed to circulate and
filter non-metallic dust, which is generated
throughout the work area.
1) This air cleaner can be hung from the ceiling.
Remove the four pan head screws (A) Fig.4 from
the top of the air cleaner housing using a Philips
screwdriver.
2) Install the air cleaner hooks (B) Fig.4 and hex.
nuts (C) the top of the air cleaner housing. Screw
in the hooks all the way and then tighten the hex.
nuts against the housing. You will need to hold the hook so it doesn’t spin while
tightening the lock nut.
3) Drill holes and mount the ceiling hooks (E) Fig.3 in the ceiling and use the chains (G)
Fig.3 provided to mount the air cleaner.
WARNING!
Ceiling hooks must be anchored to the building structure, which will support a
minimum of at least 50 pounds. Never mount to drywall or false ceiling grids. Hang unit
with a 7ft. clearance from the floor.
Note: If using different hooks or chains, make sure they are properly rated for hanging this
unit.
Figure 3
Figure 4
