OWNER’S MANUAL
11
2) ENGINE OIL REPLACEMENT
3) AIR FILTER
1. Place the machine on a level surface
and warm up the engine for several
minutes. Then stop the engine.
2. Remove the oil filler cap.
3. Place an oil pan under the engine.
Remove the oil drain plug so that the
oil can be completely drained.
4. Check the oil drain plug, gasket, oil filler
cap and O-ring. If damaged replace.
5. Add engine oil to the upper level.
6. Reinstall the oil drain plug.
Maintaining an air cleaner in proper condition
is very important.
Dirt induced through improperly installed,
improperly serviced or inadequate elements
damages and wears out engines.
Keep the element always clean.
1. Take out the air cleaner, clean it well in
kerosenee and dry it.
BE SURE NO FOREIGN MATERIAL
ENTERS THE CRANKCASE.
CAUTION:
0
o
C
25
o
C
32
o
F
80
o
F
C SAE 10W
B SAE #20
A SAE #30
or 10W-30
or 10W-30
or 10W-10
or 10W 40
or 10W-40
or 10W-40
2000 WATT GENERATOR
12
2. After wetting the element by clean engine oil , squeeze it tight by hand.
3. Lastly , put the element in the case and install it securely.
The engine should never run without the element; excessive piston and/or
cylinder may wear.
4) MUFFLER
The engine and muffler will be very hot after the engine has been run.
Avoid toughing the engine and muffler while they are still hot with any part
of your body or clothing during inspection or repair.
1. Remove the muffler from the engine.
2. Clean the carbon deposits out of the
muffler using a wire brush.
3. Check the muffler , Replace it if damaged.
4. Install the muffler to the engine.
7. TROUBLE SHOOTING
1) Engine fails to start
1. Fuel system
No fuel supplied to combustion chamber.
- No fuel in tank-Supply fuel
- Clogged fuel line-Clean fuel line.
- Foreign matter in fuel cock-Clean fuel or if closed , open it.
- Clogged carburetor-Clean carburetor
CAUTION:
WARNING:
