2000 WATT GENERATOR
7
5. Warm up the engine.
6. Turn the choke level back to the operating position.
7. Warm up the engine without a load for a few minutes.
2) USING ELECTRIC POWER
1. AC PROTECTOR
(a) Check the pilot lamp for proper voltage.
(b) Turn off the switch of the electrical appliances before connecting to the
generator.
(c) Insert the plugs of the electrical appliances into the receptacle.
CAUTION:
- Be sure the electric apparatus is turned off before plugging in.
- Be sure the total load is within generator rated output.
- Be sure the socket load current is within socket rated current.
NOTE:
When the circuit breaker no-fuse breaker turns off during operation
，
the generator is overloaded
2. BATTERY CHARGING SOCKET (OPTION)
CAUTION:
(a) This socker may be used for charging 12V/8.3A batteries only.
(b) When charging
，
connect the charging cables to the battery terminals
and then to the DC battery charging socket of the generator..
(c) The leads must be connected making sure of the
（
+
）
and
（
-
）
polarity
OWNER’S MANUAL
8
3
）
STOPPING THE ENGINE
1. Turn off the power switch of the
electric apparatus or unplug the
cord from receptacle of the generator.
2. Turn the engine switch to “STOP”.
3. Turn the fuel cock lever to “OFF”.
