ASSEMBLY
UNPACKING
Remove all the components and the Sandblast Cabinet from the carton. Empty the
contents inside the cabinet. Remove the white protective film on the clear window.
ASSEMBLY
1) Position the stand frame (A) Fig.1 with its mounting holes on top on a level surface.
Install the 4 legs (B) to the stand frame using only two countersunk head screws and
hex. nuts in each corner, exactly as shown in Fig.2. Only hand tighten hardware at this
point.
2) Install the 4 feet (A) Fig.3 to each leg (B) using two pan head screws and hex. nuts for
each foot.
3) Install the shelf (A) Fig.4 in between the 4 legs using two pan head screws and hex.
nuts for each leg. Only hand tighten hardware at this point. Pivot the stand assembly
and place it on its feet as shown in Fig.4.
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
