Kinetik BPX1A, User Manual

Page: 6 / 26

Loading the Batteries
a. Open the battery cover at the back of the monitor.
b. Insert three “AA” batteries, observing correct polarity.
c. Close the battery cover.
Replacing Batteries
When the LCD screen displays ‘ ’, new batteries must be inserted
immediately to ensure accurate results.
Rechargeable batteries with a voltage of 1.2V are not suitable for this product.
Please dispose of batteries according to battery manufacture’s instructions.
Insert the rubber tube plug of
the cuff firmly into the cuff socket
located on the side of the monitor
to ensure there is no air leakage.
The cuff should be ready to use. Ensure
that the end is passed through the metal
loop and the hook and loop fastening is
facing outwards.
Do not mix old and new batteries or different types of batteries. Do not use rechargeable batteries. Only batteries of the
same or equivalent type as recommended are to be used. Batteries must be handled with care under adult supervision. If
batteries leak and come into contact with the skin or eyes, wash immediately with copious amount of water.
Setting up your Blood Pressure Monitor
b. a.
Connecting the Cuff
5