EMC Table
output power
of transmitter
The Digital Blood Pressure Monitor is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or
the user of the Digital Blood Pressure Monitor can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the Digital Blood Pressure Monitor as recommended below, according to the maximum output power of the
communications equipment.
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1
At 80 MHz and 800 MHz. the separation distance for the higher frequency range applies.
NOTE 2
These guidelines may not apply in all situations .Electromagnentic propagation is affected by absorption and reflection from structures, objects
and
people.
80 MHz to 800 MHz
800 MHz to 2.5GHz
Recommended separation distances between
portable and mobile RF communications equipment and the Digital Blood Pressure Monitor.
Separation distance
according to frequency of transmitter
(m)
100
10
0.1
0.01
1
11.667
3.689
0.369
0.117
1.167
23.333
7.379
0.738
0.233
2.333
19
Summary of Contents for BPX1A
Page 1: ...User Manual BPx1A...
Page 24: ...23...
