9
Using the kit
Slide the battery in place (from left to right) on to the battery mount, and then use the key turning it
clockwise to lock it in position. Make sure the battery is properly secure before riding the bike.
The on/off switch for the battery is located at the top-rear of the unit.
The charging socket is also on the rear of the unit, on the opposite side to the on/off switch. The battery
can be charged on or off of the bike
The battery has a meter showing the remaining capacity, and a light which would normally be used when
the battery is fitted to the rear of a bike. To see the state of the battery, press the ‘Voltage’ button, and to
switch the light on/off, press the light button. The light will cycle from Off > On > Flashing > Off.
The meter showing the remaining battery capacity is made up of several LED’s, they are mostly green but
there is a single red LED. This red LED is always red and cannot change colour. It is like this to indicate that
if the red LED is the only one lit, the battery is almost completely flat, and requires charging.
