8
Controller
You can now attach the display, motor cable and pedelec sensor and battery leads to the controller. The
leads coming form the controller match the leads from the other components, it’s not possible to plug
them into the wrong connectors, but pay close attention and ensure that the arrows on each of the black
connectors line up before pushing them together.
The power leads are black and red, and should be mated with the matching leads from the battery-
mount/controller.
To pedelec
To display
To battery
To motor
The cables should be run alongside the existing cables already on the bike as much as possible, and
Shrink the supplied heat-shrink
sleeving over the battery cable
connectors, and then use the
ribbed cable-tidy to secure/hide the
cables.
You will need to purchase a pouch
of some sort like the one shown to
the left to protect the controller
from the elements, we don’t supply
these currently. This ideally should
be fitted just below/behind the
handlebar clamp.
