6
Battery mounting
The mounting for the battery fits where the luggage block would normally be. If you have a luggage block,
remove it before you go any further.
The parts shown below-left must be fitted first. Use the two M5 button bolts to secure both of the parts
to the frame of the bike, as shown below-right.
The parts to be fitted next are shown below-left. Drop the white into the rear of the black casing, and feed
the four M5 cross-head bolts through the metal support from the other side, and then secure it to the
bike. The round opening in the side of the black plastic should be on the left as you look at the bike (the
right side if you were sitting on the bike).
When tightening these four bolts, tighten them a little each and go around each of them until they are all
tight. Don’t tighten one fully and move on to the next, tighten each of them gradually.
