Get Connected - GymAware PowerTool LE
2
Download the GymAware App from the iTunes Apps store
Search for GymAware in “iPad only Apps”
Note:
GymAware PowerTool LE will
only
work with App v2.3 and above.
For the best experience make sure your iPad is running the
latest version of iOS.
Get Started:
Ensure the iPad App is downloaded and the GymAware PowerTool
placed on a flat surface on its magnetic feet.
1. Open the GymAware App - On initial opening only, the App
guide will appear as a set of slides - read these then close by
clicking the “X” at the top of the window.*
2. Slowly pull the tether twice to wake up your PowerTool - or
press the reset switch located on the side of the PowerTool
3. The connection window will pop up (bottom left of the screen)
4. Ensure the tether is fully retracted
5. Tap the I’m at Zero button**
You are now connected and ready to collect data!
*
The help slides can be accessed at any time by tapping the yellow “?” located under the iPad time at the top of the screen.
** Zeroing the device only needs to be done once per session