Trouble Shooting
6
PowerTool connects to the iOS device, then omits one long beep
and switches off.
The PowerTool has a problem and cannot continue
communicating with the iOS device.
Restart the iOS device.
iOS and PowerTool Communication
Hold the Sleep/Wake button for 5 seconds then swipe the on-
screen slide to power off.
Next, turn the iOS device back on by pressing the power button.
There are occasions where you may find your PowerTool
is not behaving as it should. It may not be responding
or disconnect from the App. Listed below are some key
trouble shooting steps you can implement to try to resolve
the issue:
1. Make sure BlueTooth is on
Yes, a rookie mistake, but it happens especially after
traveling or when iPads are left out in the weights room.
2. Perform a Full Reset of the PowerTool
Nothing like a good re-boot to wake everything up. Press
the reset button located on the side.
3. Leave the PowerTool on charge overnight
Plug it in - a good 10hr charge can make the difference.
4. Forget and re-pair the PowerTool with your iPad
With a lot of BlueTooth connections in the air, sometimes
your PowerTool will connect to another iPad in range, or
just get scrambled.
5. Bad State
Try the battery disconnect - search for help at
gymaware.zendesk.com
Restart the iOS
Online Help -
GymAware.zendesk.com
