USER GUIDE
apexDRIVE User Guide 9200162 0v10
42
9 Maintenance & Repair
Your apexDRIVE is designed for long service in a demanding professional environment.
In normal use no user maintenance should be required beyond periodic functional and
safety testing, basic cleaning and filter replacement.
In the event of damage or premature failure please contact Kinesys, or your local
distributor to arrange service support or repair.
9.1 Cleaning & Inspection
Warning!
Turn off power to the apexDRIVE before cleaning and inspection.
The enclosure should be kept clean and dust free by periodically wiping down with a dry
lint free cloth. A small clean, dry paintbrush may be used to remove dirt from grilles and
around controls.
Light dirt or finger marks may be removed using a slightly dampened cloth if necessary.
To avoid damaging the surface finishes of the apexDRIVE do NOT use harsh chemicals
or abrasive materials when cleaning.
Filters shall be cleaned in accordance with the procedure on page 43.
Check the integrity of all connectors and controls. If damage is noted then contact
Kinesys, or your local distributor to arrange repair.
9.2 Checking & replacing brake fuses
The brake fuses are simple to change using the spare fuses supplied in the fuse
carrier(s)
1. Turn off power to apexDRIVE
2. Open fuse carrier
3. Remove fuse
4. Use fuse checker or continuity function of a multimeter to confirm fuse has failed.
5. Use fuse checker or continuity function of a multimeter to confirm SPARE fuse is
serviceable before use.
6. Check fuse rating is correct (4A aR 10x38mm)
7. Insert serviceable fuse in fuse carrier
8. Restore power and confirm fuse fault has cleared
Note!
It is recommended to replace the spare fuse after use so that a spare is always
available.
