USER GUIDE
apexDRIVE User Guide 9200162 0v10
12
3 Overview
3.1.1 Layout
This section describes the layout of the front panel controls and the rear panel
connection option on an apexDRIVE
3.1.2 Front Panel
Figure 1 Front panel layout
1.
‘Power Supply’ MCB
– Used to isolate power to the control systems within the
apexDRIVE, refer to page 22 for more details.
2.
‘Drive’ MCB
– Used to isolate the three phase power from the internal power
electronics and the apexHOIST, refer to page 23 for more details.
3.
Brake Fuses
– replaceable fuses for the hoist brakes, refer to page 23 for more
details.
4. Mode Key Switch
– Used to select ‘Override’, ‘Remote Control’ or ‘Local’
operational modes, refer to page 25 for more details.
5. Emergency Stop button
– Used to stop all movement in the system in the event
of an emergency, refer to page 24 for more details.
6. Touch Screen Display
– Used to show details of the apexHOIST position,
movement, system status, faults and for navigating the system menu, refer to
page 25 for more details.
7. Manual direction controls
– Used with the touch screen to allow local control of
the connected chain hoist, refer to page 32 for more details.
8. Drive ventilation
– Hot air exhaust outlet
1
from the variable speed drive and
braking resistor. DO NOT OBSTRUCT AIRFLOW.
9. Carry handles
– To be used for carrying and handling the drive.
1
Check condition periodically, refer to page 44
1
2
3
4
5
6
4
7
6
8
7
9
8
9
8
