D
OCUMENT
301900,
R
EVISION
D
E
PI
S
ENSOR
U
SER
G
UIDE
59
Figure 29: Outer foil tape and drain-wire shrink tubing
3. Now insert the twisted pairs of wires into the grommet. Use the
schematic in Figure 30 to find the proper wire-to-solder cup
locations.
Be sure to follow the proper half of the schematic
below
, depending on whether you are currently assembling the
recorder end or the EpiSensor end of the cable.
Figure 30: Schematic of EpiSensor cable to both mating connectors
