D
OCUMENT
301900,
R
EVISION
D
64
E
PI
S
ENSOR
U
SER
G
UIDE
Initial Assembly of the EpiSensor End
Now that the connector on the recorder end of the cable, you should now
have only those items necessary for assembling the EpiSensor end of the
cable left in the assembly kit. To make sure, select the parts listed in Table
14 and illustrated left-to-right in Figure 37. To install EpiSensor mating
connector P/N 850407 on the EpiSensor end of the 840356 cable, you will
require:
Table 14: Parts for EpiSensor-end mating connector assembly
Part Name
KMI P/N
Commercial P/N
Description
Right-angle mating
connector
851370
851-08EC14-19
1 connector
Foil tape
880699
1183 (3/8" wide)
6 pieces, 3/8" x 1"
Foil tape
880699
1183 (3/8" wide)
1 piece, 3/8" x 3"
Foil tape
880700
1183 (1" wide)
1 piece, 1" x 3"
Shrink tubing
850839
FIT 221-1/4"
1 piece cut 1/4" long
Shrink-n-Shield tubing 851366
SST-20
1 piece, 3/4" x 3"
Thermofit tubing
851186
DWP-125 3/4" black
1 piece, 3/4" long
#22 black wire
840600
UL1429-22-1934-0
3 pieces, 3" long
Figure 37: Parts for EpiSensor-end mating connector assembly
Note
: In place of the 3/8" foil tape you may have received two pieces of
1"-wide foil.