28
7.3.1 Set the trigger method
Command
Function
Feedback/Explanation/Example
SYSONMETH[X].
Set the trigger method to perform SYSTEM ON.
SYSONMETH1.
A video or IR signal has been set as
trigger for SYSTEM ON.
SYSOFFMETH[X].
Set the trigger method to perform SYSTEM OFF
SYSOFFMETH1.
A missing video or IR signal has
been set as trigger for SYSTEM OFF.
NOSIGDLY:[XXXXX].
Set the system off delay time to XXXXX (default
10mins = 00600 at a range of 5 to 180mins).
When no HDMI video signal has been detected,
the system will go off after the delay time.
NOSIGDLY:00300.
The delay time related to the HDMI
signal has been set to 300 seconds.
NOIRDLY:[XXXXX].
Set the system off delay time to XXXXX (default
10mins = 00600 at a range of 5 to 180mins).
When no IR signal has been detected, the sys-
tem will go off after the delay time.
NOIRDLY:00300.
The delay time related to the IR
signal has been set to 300 seconds.
5VORTMDS[X].
Set the HDMI video signal trigger condition
5VORTMDS0.
Recognizes an active source by its
hotplug or video signal
GSYSONMETH.
Report the trigger method of SYSTEM ON.
VIDEO TRIGGER FOR SYSTEM ON!
GSYSOFFMETH.
Report the trigger method of SYSTEM OFF.
NO VIDEO TRIGGER FOR SYSTEM
OFF!
GNOSIGDLY.
Report the delay time of SYSTEM OFF when the
controller detects no input source signal (5V/
TMDS).
DETECT NOSIGNAL DELAY TIME
300S!
X
Description
0
Detects IR signal
1
Detects HDMI video signal
(default 5V, or TMDS)
2
Detects IR or video signal
X
Description
0
Detects IR signal
1
Detects HDMI video signal
(default 5V or TMDS)
2
Detects IR or video signal
X
Description
0
Detects 5V signal (hot plug)
1
Detects TMDS signal (video)
