25
6. DIP Switch operation
6.1 EDID management
The EDID (Extended Display Identifi cation Data) is used by the source device to match its video resolution
with the connected display or projector. By default, the source device obtains its EDID from the connected
display. The DIP switch on the front panel can be used to set the EDID to a fi xed value to ensure the
compatibility in video resolution.
The switch represents “0” when in the lower (OFF) position, and it represents “1” while putting the switch
in the upper (ON) position.
Switch 1~3 are used for EDID setting. The DIP switch status and its corresponding setting are shown at the
back of the product.
Switch status
Video resolution
Audio format
000
Pass Through
001
1080P
2-channel
010
1080P
Multi-channel
011
3840x2160@30Hz HDR
2-channel
100
3840x2160@30Hz HDR
Multi-channel
101
3840x2160@60Hz HDR
2-channel
110
3840x2160@60Hz HDR
Multi-channel
111
User-defi ned EDID (Upload the EDID by type-A USB port)
Note:
• 2-channell: Supports LPCM 2CH.
• Multi-channel: Supports LPCM 8CH, Dolby TrueHD, DTS-HD , Dolby Digital5.1, DTS 5.1, Dolby Digital
Plus.
