19
operation on the other side. To use is as a toddler bed, remove one of the sides (2) beforehand,
and install it there using the screws (B) and wheel nuts (E) on the side (4) (fig IIIb). In addition,
connect the centre of the side panel (4) to the bottom using screw A and nut E. NOTE: The
toddler bed can only be used with the bottom in the lowest position. The cot is ready for use
once the mattress is inserted and all attachments are firmly secured.
3. Maintenance and cleaning
Frame - clean with a soft, clean and dry cloth.
Handwash.
Do not wash. Clean the product
gently with a damp cloth and a mild
detergent.
Do not bleach
Do not iron
Do not dry in a tumble dryer
Do not dry clean
Do not fold or store the product when it is wet and never store it in wet conditions, as it can
lead to mould growth.
4. Warranty
1.
All Kinderkraft products are covered by a 24-month warranty. The warranty period starts
from the date the product is handed over to the Buyer.The warranty is only valid in the
member states of the European Union, excluding overseas territories (as currently defined,
including in particular: Azores, Madeira, Canary Islands, French Overseas Departments,
Åland Islands, Athos, Ceuta, Melilla, Helgoland, Büsingen am Hochrhein, Campione d'Italia
and Livigno) and the territory of the United Kingdom of Great Britain and Northern Ireland
excluding the British Overseas Territories (e.g. Bermuda, Cayman Islands, Falkland Islands).
2.
The manufacturer's warranty does not apply to countries not listed above. The conditions
of the additional warranty may be determined by the Seller.
3.
In some countries, it is possible to extend the warranty to a limited period of 120 months
(10 years).The complete terms and conditions and the warranty extension registration
form are available at WWW.KINDERKRAFT.COM
4.
The warranty is valid only in the territory indicated in paragraph 2.
5.
Claims must be made by completing the form available at
6.
The warranty does not cover:
A.
Cosmetic damage, including but not limited to: scratches, dents and cracks in plastic,
unless the failure is due to a material or manufacturing defect;
B.
Damage resulting from misuse or poor maintenance - including but not limited to:
mechanical damage to products caused by misuse or poor maintenance;
•
Refer to the instructions for use and installation of the product contained in the user
manual;
C.
Damage caused by improper assembly, installation or disassembly of products and/or
accessories;
Summary of Contents for LUNKY XL
