5.10
USER REPLACEABLE PARTS
The only user replaceable parts on this fire are the fuelbed / log form, and the
handset / ultrasonic receiver batteries, which may be replaced as described in the
below. Replacement of any other parts must be carried out by a
competent person such as a GAS SAFE registered gas installer.
The part numbers of the user replaceable parts are as follows, these are available
from specialist spares stockists whose details can be found on our web site,
www.bfm-europe.com, in the ‘stockist’ section.
Complete Ceramic Set inc. 5 logs & bag of loose gravel (All Models)B-105650
Loose Gravel Set (All Models)
B-105660
Base Log “A” (All Models)
B-105670
Log “B” (All Models)
B-105680
Log “C” (All Models)
B-105690
Log “D” (All Models)
B-105700
Log “E” (All Models)
B-105710
5.11
REPLACING THE BATTERIES IN THE HANDSET
a)
Remove either the 1 off 9V battery or 3 off AAA batteries (dependent
upon which remote system is fitted to the product) by removing the
cover on the back of the handset.
b)
Refit new battery and replace cover.
5.12
REPLACING THE BATTERIES IN THE FIRE
a)
Remove the trim assembly as detailed in section 5.9
b)
The battery pack on SIT equipped models is at the front of the product
in the centre. Replace with 6 off AA batteries. The batteries on the
Mertik Maxitrol equipped models are on the left hand side, in the
receiver unit. Slide the cover off and replace with 4 off AA batteries.
56
