5.5
LIGHTING THE APPLIANCE - MERTIK MAXITROL GV60 REMOTE
CONTROL
IMPORTANT : IF THE BURNER IS EXTINGUISHED FOR ANY REASON YOU MUST ENSURE THAT
YOU WAIT A FULL FIVE MINUTES BEFORE ATTEMPTING TO RE-LIGHT THE FIRE.
The product is controlled by the remote handset supplied with the fire. Ensure the
9V battery as supplied in the loose items pack has been
fitted to the fire before attempting to light it and the 4 off AA batteries have been
fitted to the reciever unit, located next to the control valve at the L/H/S. There are
3 modes of operation of the product, “MANUAL mode”, “TEMPERATURE mode”
and “TIMER mode”.
5.5.1
Operation of the Fire in “MANUAL” mode
a)
Locate the ON/OFF switch on the appliance, it is situated behind the
controls access cover at the bottom of the fire. Ensure that the on / off
switch on the valve is in the “ON” (1) position as shown below in Fig. 7
Fig. 7
b)
The remote handset is now used to control all functions of the fire. To
light the fire, press the “UP” arrow and and “OFF” button simultateously.
as shown on Fig. 34 below. You will hear a click and the fire begins a
30 second ignition process. The pilot and main burner will light.
The appliance is now in “MANUAL mode” which will be shown via the
“MAN” graphic on the display of the handset as shown below in Fig. 8
Fig. 8
Manual Graphic
on Handset Display
Switch in the “ON” position
44
