11
SMART 9 STAGE BATTERY CHARGER
& MAINTAINER
24V 6 AMP
TROUBLE SHOOTING
PROBLEM
INDICATION
POSSIBLE CAUSES
SOLUTIONS
Charger does
not work?
No Indicator lights ON
- NO AC power
- Check AC connections and
make sure the AC Power
Point is switched ON.
- Try a different AC Power
Point which you know is
working.
Charger has NO
DC output?
Fault RED LED is ON
- Output is short circuited
- Reverse polarity protection
- Loose / bad connection to the battery
- Check DC connection
between charger and
battery and make sure
they are not short circuited
(Touching each other).
- Check that the crocodile
clips have not fallen off or
come loose.
- Check that the crocodile
clips/ring terminals are
connected to the correct
polarity.
Note: The charger output is
only present when connected
to a battery.
NO charging
current?
Fault RED LED is
Flashing
- Battery is severely sulphated
- Battery has a damaged cell
- Over temperature protection mode
- Check the battery
condition, age etc.
- Battery may need
replacement.
- Move battery & charger to
a cooler environment.
The full / float
light won’t come
ON.
Fault RED LED is
Flashing
OR
Full GREEN LED is
Flashing
- Battery Ah capacity too large for the
battery charger and it has timed out
- Battery is defective
- Battery is severely sulphated
- Check the charger
specifications match the
battery capacity. Eg. make
sure battery capacity is not
too big for the charger.
- Battery may need
replacement.
- Charge rate selected
might be too low for the
battery. Switch charger off
and on and try again or try
a higher charge rate setting
providing it doesn’t exceed
the maximum charge limit
for your battery.
KP87007 Ozcharge manual_OC2406U.indd 11
18/04/2018 2:17 PM