16. DO NOT operate the tool if you are under the influence of drugs, alcohol or medication
that could affect your ability to use the tool properly.
17. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, jamming,
breakage, improper mounting, or any other conditions that may affect the tool’s operation.
Any part that is damaged should be properly repaired or replaced before use.
18. MAKE THE WORKSHOP CHILDPROOF. Use padlocks, master switches, and ALWAYS
remove starter keys.
LASER SAFETY
•
The laser light beam used in this system is Class III. These lasers do not normally present
an optical hazard, although staring at the beam may cause flash blindness.
SAVE THESE SAFETY RULES
WARNING:
DO NOT STARE DIRECTLY AT THE LASER BEAM! A HAZARD MAY EXIST
IF YOU DELIBERATELY STARE INTO THE BEAM, PLEASE OBSERVE ALL SAFETY
RULES AS FOLLOWS:
•
THE LASER SHALL BE USED AND MAINTAINED IN ACCORDANCE WITH THE
MANUFACTURER'S INSTRUCTIONS.
•
NEVER AIM THE BEAM AT ANY PERSON OR AN OBJECT OTHER THAN THE
WORKPIECE.
•
DO NOT PROJECT THE LASER BEAM INTO THE EYES OF OTHERS.
•
ALWAYS ENSURE THE LASER BEAM IS AIMED AT A WORKPIECE THAT DOES NOT
POSSESS REFLECTIVE SURFACES, AS THE LASER BEAM COULD BE PROJECTED
INTO YOUR EYES OR THE EYES OF OTHERS.
WARNING:
DUST GENERATED FROM CERTAIN MATERIALS CAN BE HAZARDOUS
TO YOUR HEALTH. ALWAYS OPERATE THE DRILL PRESS IN A WELL-VENTILATED
AREA. USE DUST COLLECTION SYSTEMS WHENEVER POSSIBLE.
II. General safety rules ... continued
4
ALWAYS WEAR EYE PROTECTION.
A bench drill press can throw foreign objects into the eyes which
could cause permanent eye damage.
ALWAYS wear safety goggles (not glasses). Ordinary eyeglasses
have only impact-resistant lenses...they are NOT safety glasses.
