Vacuum sawdust or metal shavings that accumulates in and on the motor, pulley housing,
table, and work surface.
Apply a light coat of paste wax to the column and table to help keep these surfaces clean
and rust-free.
The ball bearings in the spindle and the V-belt pulley assembly are greased and
permanently sealed. Pull the spindle down and oil the spindle sleeve moderately every
three months.
Lubricate the table bracket and locking knobs if they become difficult to use.
CAUTION: All servicing of the drill press should be performed by a qualified
service technician.
VIII. Maintenance
24
WARNING:
FOR YOUR OWN SAFETY, TURN THE SWITCH OFF AND REMOVE
THE PLUG FROM THE POWER SUPPLY BEFORE MAINTAINING OR LUBRICATING
THE BENCH DRILL PRESS.
