KinAn DL2908i User Manual Download Page 73 | Manualshive

Page: 73 / 95

KinAn DL2908i User Manual Download Page 73

8 Port /16 Port /24 Port/32 Port

User Manual

- 73 -

A freely available Dynamic DNS service (www.dyndns.org) can be used in the
following scenario.

IP-KVM

Administrator

Server

Internet

Ethernet

Router/NAT

Dynamic

DNS

Public IP

Private IP

Diagram 7-19 Dynamic DNS Scenario

        The  IP-KVM  is  reachable  via  the  IP  address  of  the  DSL  router,  which  is
dynamically assigned by the provider. Since the administrator does not know the IP
address assigned by the provider, the  IP-KVM connects to a special dynamic DNS
server in regular intervals and registers its IP address there. The administrator may
contact this server as well and pick up the same IP address relating to his IP-KVM
unit.
        The administrator has to register an IP-KVM that is supposed to take part in the
service with the Dynamic DNS Server and assign a certain hostname to it. He will get
a  nickname  and  a  password  in  return  to  the  registration  process.  This  account
information  together  with  the  hostname  is  needed  in  order  to  determine  the  IP
address of the registered IP-KVM.
        You have to perform the following steps in order to enable Dynamic DNS:
•Make sure that the LAN interface of the IP-KVM is properly configured.
•Enter the Dynamic DNS Settings configuration dialog as shown in Figure.
•Enable Dynamic DNS and change the settings according to your needs (see below).

Enable Dynamic DNS

This enables the Dynamic DNS service. This requires a configured DNS server IP
address.

Dynamic DNS server

This is the server name where IP-KVM registers itself in regular intervals. Currently,
this is a fixed setting since only dyndns.org is supported for now.

DNS System

Choose Dynamic for free DNS service. Customize for your own domain.

«
...
71
72
73
74
75
...
»

Summary of Contents for DL2908i
































































































Reviews:

No comments