8 Port /16 Port /24 Port/32 Port
User Manual
- 45 -
Operation Procedures:
1. You need to create the floppy image file first (Please refer to the section
“Creating a floppy image”). For this example, we use RawWrite software (or any
other image-creator software) to create floppy image. Please use licensed software
for this purpose.
2. You can find an image file saved at desire destination after you created it with
RawWrite.
3. Open the browser to log into the IP-KVM. Click
Virtual Media
, and then
Floppy
Disk.
Click the Browse button to choose the image file.
Click on the button
Upload
to initiate the transfer of the chosen image file into the
IP-
KVM module’s on-board memory.
4. After you uploading the image file, you will see the information below.
5. Open the remote console and you will see a virtual Floppy drive is created on the
host computer that connects to IP-KVM.
Summary of Contents for DL2908i
