Kimoto Kimosetter 410, User Manual, Page: 86 / 160

84
Chapter 3 - RIP for Mac OS 9.x & Mac OS X Classic
Centering
Pressing this button will put the image in the center of the printable
area of plate.
Giving a value to Offset W and Offset H, you can shift the position of the image
from the above home position.
Offset W:
Enter the value to be shifted to right or left. The value should be
within the range from -150mm to 150mm.
Offset H:
Enter the value to be shifted up or down. The value should be within
the range from -250mm to 250mm.
Note
For more detailed explanation on how the Offset adjustment
works, see the Appendix A.
Extended Driver Option : Shift-key + Control key + [Driver Option] button.
When [the driver option] button is clicked while pushing Shift-key and Control key,
the enhanced dialog with the “Centered Vertically (left justify)” button is displayed.
Centered Vertically, Left justify
Pressing this button will center the image vertically starting at the left
side of the plate. With the right feed guide in the inner position the
printer will print with a 3.4mm margin. With the right feed guide in the
outer position the margin is 30mm.
Unit:
The Unit of the input value of the Offset W/Offset H is changed to
mm or inch.
Setting:
You can save the settings for Offset Adjustment for frequently used
layouts. This field displays your saved settings to choose from.
Delete:
This button deletes a selected setting from the list.
Add: Press Add button to save the current setting in the list. Type a name
with 64 characters or less. You can save up to 10 settings.
Reset: Bring back the default setting.