Kimoto Kimosetter 410, User Manual, Page: 132 / 160

130
Chapter 4 - Appendix
6. Locate the transport rollers.
Locate the five transport rollers adjacent to the cork pieces on
the sheet feeder.
7. Clean the transport rollers.
While holding down the plate, wipe transport rollers clean with
the alchol wet tissue.
In addition wipe the rest of dust with a cotton bud again. As the
roller has some horizontal ditch, wipe it in horizontal direction.
In addition wipe the cork pieces on the sheet feeder with the
alchol wet tissue, then wipe with the dry cloth.
8. Rotate the transport rollers.
Press and release the
ready/insert button, and the transport
rollers will rotate a certain amount. Repeat the cleaning process
with a moistened cotton bud. Please note that the sheet feeder
will come up as the rollers rotate.
Caution:
Never reach into the printer. Doing so can result in a trapped
hand as the carriage moves to the left, which can cause injury
and/or mechanical trouble.
9. Close the front cover.
The transport rollers will rotate in full after pressing the ready/
insert button 25 or 26 times. When you have thoroughly cleaned
the transport rollers, gently close the front cover.
Locate the transport rollers here.