Kimoto Kimosetter 410, User Manual, Page: 23 / 160

21
for Windows and Macintosh
Installing Ink Cartridges
This section describes how to identify ink cartridge types and how to install and exchange
cartridges.
Identifying Ink Cartridge and Media Types
Listed below is the ink cartridge type designed for Kimoplate e 2 .
Ink for Kimoplate e
2
(Part number: KPE2-INK)
Installing Ink Cartridges
Install ink cartridges by following the steps below.
Note
The carriage can select and pick up the necessary ink cartridge
from any holder.
Caution
The ink cartridges may be put in any holder but DO NOT put ink
cartridges directly into the carriage. Doing so may result in
damage the printer.
Ink Amount Indicator
The Kimosetter 410 automatically checks the remaining amount
of the ink in each ink cartridge. The amount is checked each
time the power cord of the printer is unplugged and then plugged
in, and each time the front cover is opened and then closed.
Please note that an ink cartridge with the remaining amount of
20% will be indicated as 0% of ink available, and thus will need
to be replaced, after unplugging/plugging in the power cord, or
opening/closing the front cover.
For more economic use of the ink cartridges, we recommend to
avoid unplugging/plugging in the power cord and opening/
closing the front cover as much as possible, until the indicator
displays the “Out of ink” message.
1. Remove the stopper from the ink cartridge.
First, remove the stopper from the ink cartridge.
2. Take up any slack in the ribbon.
Insert a pencil from the side marked “B” (the side with part
number). Turn the pencil slowly to take up any slack in the
ribbon.
Stopper (To prevent slack in the ribbon)