Fluent
®
3
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Care.
Part #2205351, Revision C
Assembly Instructions
7. Determine which side of the desk the pedestals will be
located. Interlink the spacers together and align them over
the outside edge holes. Align the two single spacers on
inside edge holes. (Figure G).
8. Flip worksurface with attached leg assembly right side up
and position over the top of pedestal. Centered front to
back and flush with outside edges, carefully lower work-
surface onto pedestal as not to move spacers. (Figure H).
9. Verify that holes in pedestal are aligned with holes in spac-
ers, if not adjust accordingly. To fasten pedestal to work-
surface, one person must secure worksurface in place
while another inserts six (6) #10 x 2” screws from under-
side of pedestal. (Figure I).
10. To securely attach low storage support legs to low storage
units, position storage unit centered under support legs.
Slightly lift up on end of worksurface to expose double
sided tape and remove film backer. Lower worksurface
back down onto storage unit and apply direct downward
pressure to adhere the surface. Replace all drawings.
(Figure J).
Installation (continued)
Figure G
Figure H
Figure I
Pedestal
Peel off
film backer
Flush
Worksurface
Figure J
