Assembly Instructions
Fluent
P
ri
n
te
d
in
U
.S
.A
.
©
2
0
0
9
K
im
b
a
ll
In
te
rn
a
ti
o
n
a
l,
In
c
.
T
8
0
0
.4
8
2
.1
8
1
8
F
8
1
2
.4
8
2
.8
3
0
0
Page 1 of 1
Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call Kimball Office Customer Service.
Part No. 2205362 Revision A-09
Suspended Overhead Storage
Tools Required
Package Contents
Installation
1. A suspended overhead storage unit mounts between two
set-on storage units or between a set-on storage unit and
a vertical storage unit. Align the units in their desired
position. Adjustable shelf holes have been pre-bored on a
1 1/4" boring pattern into the inside end panel of each
cabinet. Using a 7/32" drill bit, bore a through-shelf hole
from the suspended storage unit into the adjoining unit.
(Figure A).
2. Align connecting holes in storage units and attach together
using the eight (8) provided connecting bolts, four per side.
Insert half of a connector bolt into one connecting hole, and
insert the other half into the opposite connecting hole.
Tighten all bolts securely, making sure set-on-storage unit
and overhead storage units are flush against each other with
no gaps. (Figure B).
3. A suspended unit should not be connected to another
suspended unit! (Figure C).
Figure A
Figure C
Suspended
Overhead
Storage
Set-on
Storage
Screw Gun
#2 Phillips Head Bit
⁷⁄₃₂
" Drill Bit
Pencil
Tape Measure
Figure B
Philips Screwdriver
Connecting Bolts
