Operation Manual Page 24
Confirm pressing
“ENTER”
and escape pressing
“U”
.
Auto Tare Function
When display is showing zero and without any object on the platter, place
the empty recipient or box on the platter.
Scale will show zero and automatically will operate Tare function, showing
“0” value and turning on scale tare symbol on display.
Place the object in the box, and scale will show net weight. (object weight).
If you remove all from the platter, scale will cancel tare and indicate again
“0”.
Now, we can do the same operation again with no limit. Scale will always
operates tare automatically still we unable this function.
9.5 Stable Filter
In adverse environmental conditions, or when scale is used in instable
weightings, you can increase the weighting stable with filters.
To access this function, press
“PLU”
and display will show
“PLU XX”. Press
“RIGHT ARROW”
still display shows
“FiLTEr”. Press
“ENTER”
to confirm,
and display will show a digit on the right, in accordance with the following
table:
Filter 0-
Originally programmed in Factory (Do not use if you do not know)
Filter 1-
Stable environments (fast response)
Filter 2-
Not really stable environments (medium response speed)
Filter 3-
Instable environments (low response speed)
Filter 4-
Very instable environments (slow response speed)
Filter 5-
Strongly instable environments (very slow response speed)
To change it, press
“UP ARROW”
or
“DOWN AROW”.
Confirm pressing
“ENTER”.
