Kilotech KWD 750SS, Operation Manual

Page: 15 / 30

Operation Manual Page 15
7.7 Piece Counting Preset (Saving a piece average weight)
When display on piece counting mode (
“PCS”
on) and the stable symbol on,
press
“M ”.
Press
“RIGHT ARROW”
once, and display will show
“CLUPro”.
The two digits on the right are the 100 memory position available (from 00 to
99).
Use
“UP ARROW”
and
“DOWN ARROW”
to set the target value in the
flashing digit, use
“RIGHT ARROW”
and
“LEFT ARROW”
to set the other
digit. Use
“UP ARROW”
and
“DOWN ARROW”
to set the desired memory
position value, and confirm by pressing
“ENTER”.
Display will show again
“CLUPro”. Press “
U
” to escape to counting mode.
To access to memory database and change one position, press and hold
“G/N”
. Scale will show
“CLU XX”, where XX is the memory position.