Operation Manual Page 10
digit, press
“RIGHT ARROW
”, to modify it use
“UP ARROW”
and
“DOWN
ARROW”
. To modify any digit on the left, press
“LEFT ARROW”.
Follow the
same procedure explained before.
To finish, press
“ENTER”
key and tare will be saved. If we wish to keep
saved tares, press again
“ENTER”
and follow the same procedure.
To finish
, after confirming the last tare saved, display will show “ILUPro”.
Press
“U/ESCAPE”
to escape to weighting mode.
TARE memory use
In weighting mode, with empty platter, press
“TARE”
longer than a second
till
“TLU XX” is shown, where XX is the last digit of the TARE memory saved.
To access another memory position, press
“UP ARROW”
and
“DOWN
ARROW”
to surf along the tare memories until you find the desired memory
number.
To confirm, press
“ENTER”.
Display will show tare memory value with
negative sign. Now you can place the object on the platter, and the tare
value will be deducted from weighting value (shows net weight).
You can operate with the object on the platter, then display indicate net
weighting value.
7.3
Auto Tare
