Operation Manual Page 18
the same as the superior one, but in some cases could be different,
then it should be introduced.
Hi/Lo mode selection
Hi/Lo mode should be programmed for limit function. Scale indicates by a
“BEEP” if weight is in or out the set limits. It can be programmed in two
different ways:
1- Advise when weight is within the set limits.
2- Advise when weight is outside of the set limits.
Use
“UP ARROW”
and
DOWN ARROW”
to select the desired set limit
(value), and use
“ENTER”
to confirm.
Type of Hi/Lo selection
Hi/Lo mode could be either a continuous beep, or just a one time beep. To
set it, use
“UP ARROW”
and
DOWN ARROW”
to select the desired
value, and to confirm press
“
ENTER
”.
1- No sound.
