5
2.4 LCM display function introduction
3
System setting method introduction
3.1
Hot key function introduction
3.2
Enter setting function page
1. Display job
2. Display sequence
3. Display system status
4. Display job sequence
5. Display repeat times
6. Display action time
7. Display number of turns
8. Display the tar
get torque/
display the tightening
torque
1.
Left button
: Press 3 seconds to return to the first job sequence after beep sound.
2.
Down button
: Press 3 seconds to return to the last job sequence after beep sound
.
3.
Up button
: Press up and down button and release to view tool setting
.
4.
Right button
: Press for 3 seconds to go to the next job sequence.
1. Press “ESC” button for 3 seconds to enter settings after beep sound
2. Input password and press Enter to enter settings
3. Follow below image to enter
Control setting
、
Program setting
、
Screw setting
、
File
management
；
Press
『
ESC
』
and back to status display page. Choose one of program
and press
『
Enter
』
to the next page.
Job
：
1 JS
：
1 Time
：
0.267
TP
：
1 TR
：
5 Thread
：
1.5
****** Torque:11.27kgc
Status: OK
2.
3.
4.
5.
1.
6.
7.
8.
3
1
4
2
1
2
