30
3.2 Enter the Setup Function Page
1. Press and hold the “
ESC
” key for four seconds. When you hear the buzzer “
Beep
” sound, you are on
the verification password page. If there is no action for a long time, it will return to the status page.
2. Enter the password as shown in the figure. Press “
Enter
” to go to the next page.
3. According to the figures:
Control Setting, Screw Setting, Tool Alignment & File Manager
etc.;
return to the previous page or leave, press “
ESC
” to return to the status page, or select any item and
then press "
Enter
" button to go to the next page.
1
3
2
