TOS8870A
SETUP
3
■
Do not place the unit in a corrosive atmosphere.
Do not install the unit in a corrosive atmosphere or one containing sulfuric acid mist, etc. This may
cause corrosion of various conductors and imperfect contact with connectors, malfunction, failure,
or a
fi
re.
■
Do not locate the unit in a dusty location.
Presence of dirt or dust may cause electric shock or
fi
re.
■
Do not use the unit where ventilation is poor.
Since the unit must cool naturally, leave suf
fi
cient space around it.
■
Do not place any object on the unit.
The unit employs a naturally air cooling.
■
Do not install the unit along a tilted section of floor or in a location subject
to vibrations.
If placed on a non-level surface or in a location subject to vibration, the unit may fall, resulting in
damage and injury.
■
Do not use the unit in locations affected by strong magnetic and/or elec
-
tric
fi
elds.
Operation in a location subject to magnetic or electric
fi
elds may cause the power supply to mal-
function, resulting in electrical shock or
fi
re.
■
Do not use the unit in locations where highly sensitive measuring instru
-
ments or receivers are nearby.
Such instruments may be affected by the noise generated by the unit.
■
Secure adequate space around the power plug.
Do not insert the power plug to an outlet where accessibility to the plug is poor. And, do not place
objects near the outlet that would result in poor accessibility to the plug.
1.3 Precautions for moving
When relocating the unit to an installation site or transporting it, observe the following:
■
Turn the power switch off.
Moving the unit with the power on may result in electrical shock or damage.
■
Remove all wirings connected.
Moving the unit with cables connected may break the cables or cause the unit to fall, resulting in
injury..
■
For transportation, use the special packing material for the unit.
Transport the unit in its original package to prevent vibration and falls, which may damage the unit.
If you require packing material, contact your Kikusui agent/distributor.
■
Do not move the unit by yourself.
Use two or more persons when moving the unit, which weighs more than 20 kg. Use particular cau-
tion where there are slopes or steps.
