Kikusui TOS7200 User Manual Download Page 12 | Manualshive

Page: 12 / 60

background image

12

TOS7200

Preface



Output terminals on the rear panel

Output terminals on the rear panel improve wiring workability in an automated
production line or other workshops.



Analog output

The rear panel is provided with an analog output section for measured resistance values.



Equipped with a panel memory

As the TOS7210A can store up to 10 types of panel settings, settings complying with
various standards can easily be invoked to conduct tests.



Provided with a SIGNAL I/O connector and remote-control terminal

Equipped with a SIGNAL I/O connector as standard equipment, to output the test status as
an external I/O and handle starting/stopping of tests and recalling of panel memory. In
addition, the front panel has a remote-control terminal that allows tests to be started/
stopped remotely.



Incorporating the RS232C interface as standard equipment

The tester features an RS232C interface as standard equipment for easy connection to a
PC, allowing measured data to be obtained.

Option

This Tester features the following options:

RC01-TOS/RC02-TOS remote-control boxes

These remote-control boxes remotely control starting/stopping of the tester when
connected to the REMOTE terminal on the front panel.

The RC01-TOS has one START switch, while the RC02-TOS has two.

For the RC02-TOS, a test starts only when both switches are pressed simultaneously.



Functions

•

OPERATE switch

The TEST switch can be operated only when this switch is set to ON. When it is turned OFF,
a test in progress will be stopped forcibly.

•

START switch

When the OPERATE switch is ON and the tester is in ready status, pressing this switch starts
testing.

•

STOP switch

This switch is used to shut off the output voltage or cancel a FAIL judgment. It serves the
same function as the STOP switch on the front panel of the tester.

«
...
10
11
12
13
14
...
»

Summary of Contents for TOS7200





























































Reviews:

No comments

Related manuals for TOS7200

Brand: Pall Pages: 51

Brand: ZAMST Pages: 21

Brand: Malmet Pages: 14

Brand: Zempire Pages: 2

Brand: Cameo Pages: 64

Brand: Cameo Pages: 100

Brand: CAME Pages: 32

Brand: Hammer Pages: 42

Brand: Maeda Pages: 276

Marathon Multi600

Brand: Saeyang Pages: 21

Brand: S&C Pages: 11

Brand: Gaspardo Pages: 44

Brand: Yamaha Pages: 4

Brand: Wacker Neuson Pages: 120

Brand: Zimmer Pages: 2

Brand: ZipRip Pages: 31

Brand: Sable Pages: 28

Brand: Stiga Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands