manualshive.com logo in svg

Kikusui PFX2532, Operation Manual, Page: 113 / 142

Share
Download
Kikusui PFX2532 Operation Manual Download Page 113

PFX2532

113

Turning the SL01-PFX On and Off

7

8Slot Unit (

O

ption) / 

V

o

lt

met

e

r Unit (

O

ption)

Turning off the POWER switch

1

Stop the test from BPChecker3000, and check that current is not flowing

through the DUT.

2

Turn on the POWER switches of the DC power supplies and electronic loads.

3

Turn off the PFX2532 and SL01-PFX POWER switchs.

It is also possible to turn on and off all the devices simultaneously by using a rack mount system
option or the like. For details on options, contact your Kikusui agent or distributor.

CAUTION

Risk of malfunction.

• After you turn the PFX2532 POWER switch off, wait at least 10 seconds before you turn it back on. 

Do not turn the power on and off repeatedly.

• Do not turn off the POWER switch while a charge/discharge test is in progress.

• Do not leave the DUT connected after you turn off the PFX2532 POWER switch. If left in this 

condition for a long period, the PFX2532 may malfunction, or the DUT (battery) may discharge.

Summary of Contents for PFX2532















































































































































Reviews:

No comments