8
THE USE OF NON KIKA M2M LISTED ANTENNAS, CABLES OR EXTEDING THE CABLE
LENGTH IS NOT PERMITTED BY THE FCC AND CAUSE THE BOOSTER TO SHUT DOWN AND
MAY DAMAGE THE BOOSTER AND COULD VOID YOUR WARRANTY.
EXTERNAL MOBILE ANTENNA INSTALLATION FOR AUTOMO-
BILES & SMALL TRUCKS
This consumer Mobile 50dB Wireless 4G/LTE Booster utilizes antennas that require a horizontal separation of
a minimum of eight (8ft.) feet and a minimum vertical separation of four (4ft.) feet. The external magnetic
mount antenna MUST have a minimum of 180-degree line of sight with a minimum of ten (10”) inches above
any obstructions.
Select a location on top on the roof, side mirrors or back of your RV or large truck.
Before placing the external Trucker or Omni antenna on the outside of your RV or large truck, make sure the
antenna cable can reach your Kika Katalyst Wireless Mobile 4G/LTE Booster.
The external Trucker or Omni antenna does not require a ground plane.
Run the Trucker or Omni antenna cable to the Kika Katalyst Wireless Mobile 4G/LTE Booster. Use extreme cau-
tion when using staples or any other fasteners to secure the cable and not to puncture the cable as it will cause
the Kika Katalyst Wireless Mobile 4G/LTE Booster to cease functioning properly and power off.
Hand tighten the external Trucker or Omni antenna cable to the Kika Katalyst Wireless Mobile 4G/LTE Booster
at the connector labeled “EXT-ANT.”
THE USE OF NON KIKA M2M LISTED ANTENNAS, CABLES OR EXTEDING THE CABLE
LENGTH IS NOT PERMITTED BY THE FCC AND CAUSE THE BOOSTER TO SHUT DOWN
AND MAY DAMAGE THE BOOSTER AND COULD VOID YOUR WARRANTY
