7
THE USE OF NON KIKA M2M LISTED ANTENNAS, CABLES OR EXTEDING THE CABLE LENGTH
IS NOT PERMITTED BY THE FCC AND CAUSE THE BOOSTER TO SHUT DOWN AND MAY DAMAGE
THE BOOSTER AND COULD VOID YOUR WARRANTY.
ANTENNA INSTALLATION FOR RV’S & LARGE TRUCKS
The
Kika Katalyst Wireless Mobile 4G/LTE Booster
utilizes an interior antenna that require a horizontal separation
of a minimum of eight (8ft.) feet and a minimum vertical separation of six (6ft) feet. The interior antenna must be
installed no further than ten (8ft) feet from the device.
1. Select a suitable location inside your vehicle to place the antenna making sure the cable is able to your Kika
Katalyst Wireless Mobile 4G/LTE Booster .
2. When you are installing a pannel, omni or patch antennas make sure that the antenna is pointed towards the in-
side of your vehicle and when using an omni antenna have a minimum of a 180-degreeline of sight in you vehicle.
3. Run the pannel, omni or patch antenna cable to the Consumer Mobile 50dB Wireless 4G/LTE Booster. Use ex-
treme caution when using staples or any other fasteners to secure the cable and not to puncture the cable as it will
cause the Consumer Mobile 50dB Wireless 4G/LTE Booster to cease functioning properly and power off.
4. Hand tighten the internal antenna cable to the Consumer Mobile 50dB Wireless 4G/LTE Booster at the con-
nector labeled EXT-ANT.
