A
Page 26 / 30
Product Description
RPW404P-FTL
Datasheet 1.10-65.030-01-EN
Issue 2017-04-03
Teaching in an EnOcean system gateway
►
Briefly press the “Occupancy button” repeatedly or the “
” button to select the
“
GATE
” function.
►
Hold down the “Occupancy button” for about 5 seconds and the “Teach in an
EnOcean system gateway” function will run.
The “Antenna” icon flashes briefly on the display.
A teach-in radiogram is sent to the system gateway and
a teach-in radiogram from the system gateway is awaited.
You can find details in the documentation of the EnOcean system gateway.
The display then returns to the initial display. If the teach-in process was successful,
the wireless communication icon also appears.
NOTE
An EnOcean system gateway makes it possible to connect to a Building and Energy Management
System BEMS.
This makes it possible to generate additional functions such as:
- Visualizing operating states
- Displaying trend curves e.g. for the room temperature or humidity
- Overriding the operating modes with special utilization times such as public holidays.
NOTE
The resources of the energy source are also used when communicating with a system gateway. The
increased transmission frequency has an impact on the service life of the energy source (AA lithium
batteries), see p. 29
Deleting all taught-in radio partners
►
Briefly press the “Occupancy button” repeatedly or the “
” button
to select the “
dEL
” function.
►
Hold down the “Occupancy button” for about 5 seconds and the “Delete all taught-in
radio partners” function will run.
NOTE
After all the taught-in radio partners have been deleted, the radio partners must be taught in again.
Otherwise, the room control module will switch off after 15 minutes.
