A
Page 16 / 30
Product Description
RPW404P-FTL
Datasheet 1.10-65.030-01-EN
Issue 2017-04-03
Removal
Operating level
Setting the initial display
►
Briefly pressing the selector button “
”, enables you to select the following displays:
■
Room temperature
■
Date
■
time, see example
The last display selected then becomes the initial display.
Setting the setpoint
Using the “
” or “
” button, you can change the current setpoint manually.
►
Briefly press the “
” or “
” button.
The setpoint to be set flashes.
►
Set the required setpoint using the “
” or “
” button.
The new selected value flashes for approx. 5 seconds. It is then
automatically confirmed and the room control module switches
to the initial display.
Manual override will also make the “Auto” icon disappear.
NOTE
The adjusted setpoint in the operating level remains active for a period of two hours.
The setpoints for comfort mode and economy mode that were set on the configuration level then
become active again and the “Auto” icon is displayed again.
1
1 5
2
3
